Irda 862 D4 in 1
Irda-Preheating-Blower-Solder
-ESD Safe Unit
-LED Temperature Display
-Air gun handle equipped with magnetic sensor. When air gun is hold down facing floor, system is directly set to work mode.

When put back to handle bracket ( on position) , system automatically set to standby mode. Rapid heating and the
temperature is not affected by air volume.
-Preheating station: The whole system is controlled by microcontroller and the temperature control is more accurate,
practical and safe.Preheating area of 120* 120mm
-Soldering iron: Rapid heating high performance and constant temperature .Exquisite & compact handle, suitable for prolonged use
-Infra red rework station: Dedicated infrared heating with strong penetration capability in evenly heated parts.This machine can desolder all components in 14-45 mm size.Infrared heating has no

hot air flow and will not affect the surrounding small components. It is applicable to all small components especially micro BGA component.

General spec:
Current voltage( AC) ; 220 + 10%
Current overload protection : > = 10A
Power consumption: 1200 W( whole machine)
Irda rework station
Power consumption: 180 W
Infra red temp: 200 -380 C, adjustable
Hot air rework
Power consumption: 500 W
Hot air temp: 100 -450 C, adjustable
Output airflow: 0.3-100L/ min, adjustable
Pump power: 90W
Heater: 250W metal
Heating element: carbon worm wheel direct to current machine
Soldering station;
Power consumption: 40 W
Output voltage( AC) : 22V
Soldering temp: 200 -480 C, adjustable
Heating element: Ceramic heater
Preheating board
Power consumption: 600W
Board size: 120mmX120mm
Control temp: 100 -380 C, adjustable
Dimension 46* 34* 29cm
Weight: 9.5 kg
Pc/ ctn 1
Package contain:
Base Plate 1
Lamp handle 1
Positioning frame ring 1
Circuit board support + 4-bit column 1
Two-core power cable 1
Soldering iron + hot air gun 1 each
Soldering iron bracket + hot air gun bracket 1 each
Hot air gun Nozzle 8mm x 2  12mm x 1
User manual 1( bahasa Indonesia)
Temprature setting image ilustration